I just reinstalled my dishwasher after it had been stored for a few years in my unheated garage. The water inlet valve was cracked (big surprise) so I replaced it. Now when I ran a test cycle, the water is not draining from the dishwasher.
좋은 질문 입니까?
평판: 603
4
1
HI:
Could be your drain pump is bad. But sitting for a year also the filter, grinder and area could be full of debris. Here is a great site to give you ideas on how to fix your washer, As you look for a part and click on the part picture you get a video on how to replace this part, but then you can see how the unit is put together and clean your unit out. Or replace parts not working. I am guessing a stuck flap valve also could be stuck closed.
https://www.partselect.ca/Models/GU1100X...
Good luck.
Alton
해당 답변은 도움이 되었습니까?
Turns out the drain pump motor was bad. Cleaned up the filter, grinder and flap valve. So far, so good. Thanks!
24 시간 전: 1
7일 전: 9
30일 전: 32
전체 시간: 2,132
