기기를 수리하세요 커뮤니티 상점

Model A1311 / Mid 2010 / 3.06 및 3.2 GHz Core i3 or 3.6 GHz Core i5 프로세서

342 질문 전체 보기

옵션

Can't install High Sierra after SSD upgrade

Hello everyone,

I want to bring to new life my old iMac mid 2010 changing the HHD with a SSD. But, because is not my main computer I didn’t want to spend a lot. So I bought a Drevo X1 SSD, I put it inside the iMac, connected the SATA cables and I fixed it with industrial velcro. I also short the thermal sensor out.

The problem comes when I try to install High Sierra.  Whether in recovery mode or using a flash bootable USB drive it does not work: in the first case after the “world logo”  the iMac hangs at the apple logo screen; in the second case after entering in the boot screen (pressing the Alt key) e clinking on my bootable usb drive the iMac hangs again and a completely white screen appears.

What should I do? ( I have already reset the NVRAM)

Thanks a lot

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Your machine has an SATA II (3.0) Gb/s. This drive is SATA III (6.0 Gb/s).

You need to find out if it is backward compatible.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 3개:

Thanks for answering!! Actually the SSD that I have is backward compatible because I know that it is has been used with SATA II. And, sorry, I know that in general SATA III is always backward compatible, is it?

의

Sadly no, some drives are designed to be downwardly compatible others not. As an example the Samsung 860 EVO is. Review the drives spec sheet if it doesn't say it, it's likely not.

의

Oh, thanks I didn't know that:( ...So I'm forced to change the SSD...

의

댓글 달기

귀하의 답변을 추가하세요

Alessandro Solda' 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 131