주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

Proximity sensor reattach to ribbon/flex?

How can you reattach the small proximity sensor to the flex cable. It pulled apart during removal.

if it is impossible to reattach it is there any issues with ordering a new sensor and ribbon? I was under the impression that the sensor should match the phone it’s removed from?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

It’s pretty much impossible to re-attach the proximity sensor once it’s broken off from a front camera without specialised rework station tools.

There should be no issues using a replacement front camera assembly as they work with every iPhone 6s plus.

iFixit does sell the replacement front camera and has a guide on how to replace it:

iPhone 6s Plus FaceTime 카메라 및 센서 어셈블리

iPhone 6s Plus Front Camera and Sensor Cable

iPhone 6s Plus Front Camera and Sensor Cable 이미지

상품

iPhone 6s Plus Front Camera and Sensor Cable

$29.99

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

Josh Townsend 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 114