옵션

New ifixit touchscreen fails on ipad 4 gsm

ipad 4 gsm :

replaced touchscreen with ifixit touchscreen and home button works but the touchscreen doesn't function at all. The digitizer seems to work fine. I think the touch screen is bad or I'm not getting the ribbon cable back in correctly for touchscreen. Can I test the touchscreen without installing it? Is the touchscreen independent of the digitizer ? The one issue I have is the touchscreen ribbon cable will not sit passively like the oem and thus the touchscreen does not passively seat even though the cable is connected.

There are plenty of how to videos to break down but "just reverse the steps to put back together " makes actual repair without expert help very difficult.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

게시일: 2018년 8월 31일

옵션

You can test touch screen without fully installing it onto the iPad, plugging the ribbon cable in will let the touch screen function normally if it’s not faulty.

The glass and the touch screen layer together make up the digitizer.

The cable has dotted lines near the connector end to tell you how much the cables should be seated in the connector, it should be close to behind the line and not past it. Shouldn’t take too much effort to push the ribbon cable in fully.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 달기

iPad 4 GSM

New ifixit touchscreen fails on ipad 4 gsm

답변 1개

귀하의 답변을 추가하세요