주요 콘텐츠로 건너뛰기

Fourth generation of iPad, released November 2, 2012, available in 16, 32, or 64 GB models. Model Number A1458

218 질문 전체 보기

Ipad 4 will not charge now that it has died

The IPad's battery drained last night from normal use. Put it on the charger but it would not charge at all.

When plugged in it would show the apple logo then change the the battery image in the red. It also makes the charging beep every time the apple logo is displayed. If I unplug the charger it displays the logo at the bottom showing it needs to be plugged in.

Not sure if related but the charger gets very hot when charging it.

I don't know much about Apple products, but I have visually inspected both the charger and the port and saw couldn't see anything obviously wrong. I have done Home+Power button to restart with no change.

Thanks in advance.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 1개

선택된 답변

It’s probably a dead battery, especially if this is the original battery. The iPad 4’s are getting old now and it’s normal for the battery to degrade. Eventually, it just refuses to charge. You can try to replace it yourself by following this guide.

When troubleshooting charging issues, I would do the following (in order):

  1. Always try another Lightning cable and charger, preferably Apple original or MFi certified units.
  2. The Lightning cable 8-pin connector should be sitting flush with the housing and completely inserted. If it is not, there could be lint/dust/debris inside the port impeding a proper connection. You can clean it out with fine point tweezers or a dental pick. Just be careful not to damage the pins inside the Lightning Port.
  3. Change the battery. The battery is the weakest link in the entire phone and certainly for charger related issues. It is also the easiest thing to replace. Use a battery utility, such as coconutBattery (for Mac) or 3uTools (for Windows) to test the battery prior to removal. Anything less than 70% of design capacity will require replacement.
  4. If the battery is in good condition, you can use a USB Ammeter to determine if the phone is really drawing current when it says it's charging. If it isn't drawing current, then I would change the Lightning/Charge Port.
  5. If a new battery and charge port still don't resolve the issue, then you either have faulty replacement parts (possible) or a logic board issue.

해당 답변은 도움이 되었습니까?

점수 4

댓글 2개:

Sent out for a new Apple brand power cable and adapter, I'll let you know if that solves it. Fingers crossed. Thank you.

Looks like the new charger solved the problem. Thanks for the help!

댓글 달기

귀하의 답변을 추가하세요

Aaron Russell 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 10

전체 시간: 1,656