주요 콘텐츠로 건너뛰기

4세대 iPhone. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. GSM / 8, 16 또는 32GB 용량 / Model A1332 / 검정 또는 흰색.

2375 질문 전체 보기
질문 마감됨

Smudges on Camera after back glass replacement

I ordered a transparent back for my iPhone4 and after installing, the camera is all foggy. It appears to be something on the outside of the phone, some of the adhesive that held the protective sticker on the back seems to have stuck pretty hard to the camera lens. Any Suggestions?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Put some isopropyl alcohol or goo gone on a cotton swab and softly clean the lens with it.

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

Goo gone messes up plastic bt IPA or iubbing alchol won't

You'll probably won't get the adhesive off using only IPA. You will have to use something more greasy, like Goo Gone or Goo Off, to get the adhesive off. Afterwards, just clean the lens with IPA. If you mess up, you'll have to buy a new camera. You're lucky they don't cost that much.

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 822