주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2472 질문 전체 보기

What makes touch ID not work?

I ordered a new screen for a 6S, and I unplugged the original home button and transferred it to a new screen. Touch ID does not work anymore, but normal home buttons functions do.

Do I need to just transfer the home button to regain touch ID functionality or do I need to transfer the home button cable (the one that goes behind the LCD) as well?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

선택된 해법

Either the home button was damaged.

Or the flex cable on the screen is damaged.

If the old LCD is still working. Put the original home button back on that screen, and test it on there.

If it's still the same, most likely damaged the button.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Thank you for the suggestion, I'll try that!

So I switched the home button over to the old screen, and it worked perfectly. Does that mean the new flex cable on the new screen is broken? Or does touch ID require the original flex cable as well? Also, usually when i set up the iphone with a non-original home button I'll get a notification saying that touch ID is non functional. I didn't get this notification when switching the home button over - I was able to try and set up touch ID, but it just wouldn't register any presses. What does this mean?

의견 추가하세요

귀하의 답변을 추가하십시오

Devin Kott 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 53