Skip to main content

2009년 3월에 소개된 The Mac Pro (Early 2009)는 Intel Nehalem 아키텍처를 Apple의 전문가용 데스크탑 라인에 도입하였으며 미묘하게 재설계된 내부는 2010 및 2012 CPU 업데이트를 통해 소개되었습니다.

63 질문 전체 보기

2010 mac pro 5.1 display stopped working & will not come back on

2010 Desktop Mac Pro 5.1 was working great for years. Still using Snow Leopard 10.6.8

for making use of music software. Machine started acting odd by screen sometimes not coming on and having to restart. It worsened until one day it just would no longer come on at all. I purchased a new Radeon HD 5770 because everything on the net said the card was most likely the problem. It is not the card. After replacing it, the machine chimes it is on, but screen remains black. I use the mini port with an adapter to HDMI. Checked the cable, it is good. Tried a different cable, same thing. Monitor works fine as TV screen. What do I look for next? Everyone has phones now. All the Mac fix stores are gone. I want to stay with the desktop. My screen is 32” big. I like it like that so I can see the music I write. Also the software demands 32G of RAM. A little pocket phone can not do the job. Please Help.

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

아이폰 배터리 수리 키트

Only $29.99

Buy Now

아이폰 배터리 수리 키트

Only $29.99

Buy Now

2개의 답변

가장 유용한 답변

You are correct, the first thing that goes on these is the video card. To test you need a KNOWN GOOD replacement card. So first find out if indeed that new card is good. The second thing that fails is the power supply. It can be a partial failure. The symptoms are usually that the machine reboots on its own. Over time this increases in frequency until it is doing it four or five times a day.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

thank you mr mayer. changing the card to a different slot did not remedy the display problem. I have tried changing the HDMI micro adapter to the other port just to eliminate that possibility as well. Power cord is OK. HDMI cable is OK. New 2032 battery installed. I have tried changing the connector cable for the Radeon 5770 from PCIE Aux A to PCIE Aux B just because I thought it might refer to which port I plugged the new card into. No luck there either.

If the tiny white button next to the battery is a PRAM reset button, I have depressed it as well. Still, the machine chimes on every time but the external monitor [which works fine] stays black. I always recheck the "source" option on the remote just in case as well. I will be glad to pay someone to identify or even better- fix it as working on this HP PC makes me nuts. I have been a Mac person since my 1st PC back in 1990. All my pals in entertainment said it was an absolute necessity. I now agree.

의 답변

What was the source on the card? If you want me to, I can check both cards on my Mac Pros.

의 답변

의견 추가하세요

The physical slot the video card is in might be faulty. Try moving the video card into a different slot and see if that helps.

If this doesn’t help maybe change which port the cable is plugged into on the monitor?

Other than this I cannot tell what is wrong I am sorry.

해당 답변은 도움이 되었습니까?

점수 1

댓글:

a sincere thank you for your input I will let you know...tony

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Tony Salatino 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 1

지난 7일: 3

지난 30일: 16

전체 시간: 140