주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2687 질문 전체 보기

Can I use put my iPhone 6s charging port inside of an iPhone 6s plus?

My 6s plus’s charging port no longer works, i have a spare parts iphone 6s, are they interchangeable? is it possible for me to swap them over and it to work?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 1개

가장 유용한 답변

Edit: You cannot use a 6s charging port in place of a 6s plus or vice versa on either phones.

Before replacing the port, do you need to wiggle it to charge and does the charging cable tip go in fully without a gap?

Sometimes the charging socket just needs to be cleaned because it's common for them to get clogged up with dust and lint over time.

Yep but need to be careful of the antenna cables and adhesive under the charger port when transferring from one phone to another.

I have linked a guide on replacing the charger port which you should look at:

iPhone 6s Lightning Connector Assembly Replacement

해당 답변은 도움이 되었습니까?

점수 4

댓글 3개:

Thanks! yep i've already cleaned the charging port out, and wiggling the cable around side the port doesn't allow to charge out, do you know if i can use my iphone 6s charging port and put it into my 6s plus?

Oh sorry about that, I misread the question. No unfortunately the charging port from the 6s plus and non plus are different in size.

@brandonsmith94 Are you sure it's about the charging port ? They don't go bad that easily and If the phone was used with some infamous uncertified charger it might as well be a logic board issue. If you can, before replacing the part, check if power reaches the logic board.

댓글 달기

귀하의 답변을 추가하세요

brandon 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 7

30일 전: 36

전체 시간: 4,636