기기를 수리하세요 커뮤니티 상점

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기

옵션

iPhone 5 not charging/won't turn on after screen replacement

Hi,

I had an iPhone 5 without a screen lying around for quite some time and I finally decided to buy a new front display (complete assembley). But now I noticed the phone won’t start, I first tought the battery was completely drained as it was not charged for well over a year. But when I plug the charger in it doesn’t do anything, even when I let it charge for over an hour. But when I plug in the charger I hear a verry faint clicking noice near the battery connector. Also when I try to messure the voltage across the battery it gives me 0V

Could somebody please help me with this?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 1개

So just a small update, I didn’t notice my multimeter was in “hold”, so it didn’t measure anything. Tried again and now I measure 2.6V.

And when I measure the connections on the motherboard while the phone is plugged in, i measure 0.74V

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

I think you have to charge the battery first from outer source.While the battery is in complete sleep mode sometime charging with phone is in vain.So take out battery and charge the battery from direct source like dc power supply.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 1개:

Easier said than done, I can't just put a wire on the battery connector without soldering one on it, and if I'm correct you can't just charge a lithium-ion battery with a normal dc power source

의

댓글 달기

귀하의 답변을 추가하세요

Ian 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 33