주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2687 질문 전체 보기

Network seems to be locked after upgrade to iOS 12

My 6S stopped working after upgrading to iOS 12.

Currently, it will operate normally WITHOUT the SIM card inserted. But when a SIM card is inserted, a notification pops said “Activation Required”. Tap “Dismiss”, and it will continue to “Hello” screen (like the first time it turned on), a moment later it’ll switch to home screen, without any cell reception, and pops another “Activation Required”, and repeat the whole thing mentioned.

I tried reverting to iOS 11.4, but as I write this, it still no result.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

You may want to speak with your cellular service provider about this situation. I doubt it is hardware related so I think that might be your best option at the moment.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

After repeated SIM in and out, there are some occurences where the phone connects to cellular network, but a moment later it reverts back to “No service” and the loop starts again.

The thing is, it worked normally before iOS 12. It was not a contracted unit or such, and I use the very same SIM card.

I tried different SIM cards from different providers and ended up the same.

댓글 달기

귀하의 답변을 추가하세요

Andi Huang 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 36