주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2690 질문 전체 보기

Volume buttons don't work anymore

Hello,

I dropped my iPhone 6s into my tea. Now the volume buttons don’t work anymore. If I press the volume buttons I hear the normal clicking sound but nothing happens. If I increase the volume though the menu the volume always automatically decreases again. Everything else works completly normal.

I went through the tutorial “iPhone 6s Volume Control Button Covers Replacement”.

I can't detect any anomalies. But I also have no idea.

Does anyone know which parts I could replace?

Best regards

Annika

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

By the fact that you dropped your phone in water there is a high risk of component damage and it can be hard to tell which part needs to be changed. My guess is that you need to change the motherboard itself unfortunately since i belive it’s the only electronic part connected to the buttons. If you have a similar phone close buy you can try to change parts between them to search for a faulty part. It is allways worth your time to do a soft reset, factory resets and updates but in this case i doubt this will work in your case. Water damage is allways hard.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Thank you for your answer!

I guess I just get a new phone then.

댓글 달기

귀하의 답변을 추가하세요

Annika John 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 54