주요 콘텐츠로 건너뛰기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1158 질문 전체 보기

Replaced LCD and phone worked but ear, checked cables now no power

I have an iPhone 3G that had a shattered screen and LCD. I bought replacement parts and did the repair. Everything seemed to be working until I made a phone call and could not hear from the ear piece, only sound would come when put into speaker mode. I read that maybe connector 3 was not fully seated so I went back inside the phone and tried to re-position the connector, now the phone will not turn on. I plugged it in and even after awhile of "charging" it would not even vibrate when the switch was moved. Does anyone know what may have happened, and what I can do?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

선택된 답변

check all your connections.. you may have dislodged the power flex (no. 5 or 6... the square shaped connection in the top left of your board) or the display isn't connected so you need to check 1+2, give them a firm press or they tend to pop off when you close up the display.

해당 답변은 도움이 되었습니까?

점수 4
댓글 달기

귀하의 답변을 추가하세요

Brandon 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 719