평판: 1
1
I recently, well my husband recently replaced my glass on my iphone following your fixit instructions and after playing with the #3 tab we got the audio back but however now when in phone mode my display screen stays on and I keep hitting the buttons with my cheek. Tried taking my new cover off thinking I was covering the sensor but no luck any ideas on how to fix this?
좋은 질문 입니까?
평판: 9.8k
52
32
12
a proximity sensor is used to sense when your face is near the screen, in order to blank the display and disable the buttons when you're on a call with the phone to your ear.
this sensor is located under the glass above the top left of the LCD display - just left of the earpiece speaker when viewing the iPhone from the front. if you shine a bright light at the top of the screen, or look at it just at the right angle you can see the faint outline of the sensor(s) under the glass (the ambient light sensor is also there)
perhaps re-check that all your connections are good before reassembling the phone, and also check that you haven't moved the sensor mounted in the display assembly
해당 답변은 도움이 되었습니까?
I have the same problem.
the screen turn black when is close to the face but the touch screen still works during the call conversation. very annoying
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 2,347
