메인 콘텐츠로 스킵하기

식기 세척기 수리와 분해 안내서 및 지원.

269 질문 전체 보기

power surged and then the e2 f2 code started flashing

My dishwasher is only about a year and a half old. We had a bad storm yesterday...my power surged and then the e2 f2 code started flashing. Did the reset, took the door off and checked connections...still flashing. Do I randomly start buying parts? How do I check to see if it’s something I can fix? I am handy, but appliances are new territory for me. All info. is appreciated.

Update (10/25/2018)

Block Image

Block Image

Block Image

Block Image

Update (10/25/2018)

Block Image

Block Image

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

We have the same model and issue, did you come up with a solution

의 답변

I have the same model and same problem. Did you get it fixed?

의 답변

의견 추가하세요

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

3개의 답변

가장 유용한 답변

The e2 f2 error usually means main control board is not getting correct signal from the user interface. Turn off power/breaker, remove screws holding inner door liner, remove liner and check/secure/clean all wire connections from front interface and main control board. The number you gave me an oven, please check it for accuracy.

해당 답변은 도움이 되었습니까?

점수 3
의견 추가하세요

In cases like this, the control module has been effected. This can be as simple as an open internal fuse or more complicated like a smoked controller IC. In either case, knowing the exact make and model is critical. Please update this with the make and model. Also, a Google search of the model number and the keyword “parts” should get you to a site to check for parts availability. If you can post a picture of the control module, we may be able to see a damaged part that can be replaced as a start.

Dan

해당 답변은 도움이 되었습니까?

점수 1

댓글:

Thank you. I’m adding a comment below with some pics.

의 답변

의견 추가하세요

Replaced the control module

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

deew1015 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 7

지난 7일: 30

지난 30일: 139

전체 시간: 830