기기를 수리하세요 커뮤니티 상점

3MB 공유 L3 캐시 1.8GHz 듀얼-코어 Intel Core i5 (Turbo Boost 최대 2.8GHz)

371 질문 전체 보기

옵션

Screen only works well with external display.

Screen goes dim without a connection to an external monitor. Works fine with an external monitor. By itself it sometimes works but will flicker every once in a while. Or it will just remain very dim. F2 key is unresponsive during these fits. Screen returns once external display is plugged in.

I have a new logic board and new battery installed. The display problem existed before this repair.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 1개

Try to check the connection to the display may be they are rusty connectivity between the connection.

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

Flickering is quite often related to LVDS cable issues. If logic board was replaced I guess it was for a reason..if that involved liquid damage or image issues it’s likely cable was damaged and needs replacement too.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2
댓글 달기

귀하의 답변을 추가하세요

Mark Waddington 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 67