MacBook Pro won't turn on after logic board replace. Dim green light.

Question

MacBook Pro 13 "Unibody Late 2011

2011년 하반기 모델, A1278 / 2.4 GHz i5 또는 2.8GHz i7 프로세서.

591 질문 전체 보기

Jimmy Robertson @imjimjim21

평판: 119

6

4

게시일: 2018년 10월 26일

옵션

MacBook Pro won't turn on after logic board replace. Dim green light.

I just replaced the logic board in my late 2011 a1278 Macbook Pro Unibody. It was diagnosed dead by apple so I thought I could replace it myself. So I put it in and it would not turn on. Just shows a dim green light on the charger. I bought the logic board for 250$ off Ebay from a good seller. The board doesn’t get warm at all even after charging for 4 hours so I don’t think it is getting power. Please help me!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

Dan @danj 평판: 479.4k Self employed contract worker 35 329 971 · Answer 1 · 2018-10-27T08:13:34-07:00

가장 유용한 답변

Dan @danj

평판: 479.4k

Self employed contract worker

35

329

971

게시일: 2018년 10월 27일

옵션

A dim MagSafe LED often points to a bad charging logic on the main logic board. So I’m suspecting the replacement board you got is likewise damaged as well.

You still should check the DC-In board for damage. Here’s the IFIXIT guide to get to it: MacBook Pro 13" Unibody Late 2011 MagSafe DC-In Board Replacement and heres the replacement part if you need it MacBook Pro Unibody 13" and 15" MagSafe DC-In Board. Make sure the small SMT components are not missing or damaged on the logic board.