Hello,
I just swapped out my broken screen for a new one. Thank you for the parts and the instructions. It was relatively easy process. Once everything was back together, I my phone was getting pretty hot and the battery drains quick. I opened it up again and the logic board is not happy. What steps can I take to fix this, I may have to just go back to my broken screen.
Thanks,
Joe
좋은 질문 입니까?
평판: 221.4k
15
289
807
We are just volunteers helping people fix their stuff.
It’s possible that the replacement screen is causing the battery drain issue (which in turns, heats the board). In order to test for that, you could try to re-install the original screen. If the original screen works fine without overheating, then the issue is with the replacement screen. If the replacement screen came with the Front Camera/Sensor flex pre-installed, I would try to reconnect the replacement screen without connecting the FCAM flex. Some of those “included” small parts can be unreliable. Please contact iFixit support if any parts need to be replaced.
If the original screen also has the same issue, then you may have damaged the logic boar during the repair. You will need to inspect it under magnification to see if the connectors are damaged or if any tiny components were dislodged.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 2
30일 전: 13
전체 시간: 837
댓글 1개
After being stuck in a boot loop and the Apple logo screen for the better part of the day, I am happy to say the new screen is working great. Maybe it was hooking it up to the computer while cracked open, maybe it was standing up and spinning around three times. In any case, I am good to go!
Thanks again,
Joe
Joe Andolina 의