기기를 수리하세요 커뮤니티 상점

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2688 질문 전체 보기

옵션

Compass/Level not working after battery + screen replacement

I repaired an iPhone 6s with a damaged screen and faulty battery. Prior to the repair, the compass and level worked correctly. However, since the repair, neither work, in addition to GPS being unable to sense the direction.

Any ideas what caused this and how to fix it? I can’t imagine that the compass itself got damaged during the repair since the logic board was never touched, so I can only guess it is something else causing this.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 1개

You can't replace the screen and battery without touching the motherboard, technically speaking, since both of those things are connected to the motherboard. If memory serves, the compass/accelerometer chipset is located directly below the battery connector. Replacing the chipset (microsoldering) would be the fix.

Here's a video showing the fix being done to an iPhone 6 mobo.

https://www.youtube.com/watch?v=uwXMW3NS...

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

There are 4 “sensor-related” IC’s on the logic board but none of them are in the way, so to speak. Most are under shields or on the underside of the board. Water damage or ultrasonic cleaning is known to cause issues with these IC’s but otherwise, they shouldn’t be damaged from a screen repair.

At this point, I would re-install the original screen to see if the problem persists. If it does, then somehow the board was damaged. If it doesn’t, then there may be some kind of weird issue with the replacement screen.

해당 답변은 도움이 되었습니까?

예 아니요
점수 3
댓글 달기

귀하의 답변을 추가하세요

Fintan Horan 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 977