기기를 수리하세요 커뮤니티 상점

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

옵션

My iPhone 5s won’t work after battery died and I plugged in my charger

My iPhone 5s battery died and when I tried charging it the battery icon just showed up for about a second and the phone went off.

whenever I plugged it in after that time it would take about 5 minuets to start and then show a bright black screen then it would turn back off but the body is always warm when I plug in the charger and leave it for sometime . It is visible on iTunes but keeps telling me to update to iOS 12.1 which I did the night before the screen stopped coming up, so I downloaded the update and when it was extracting it showed error 4013,I’ve tried several times but keeps showing. I really don’t know what next to to but I hope it’s not a hardware problem

NB the screen is still black

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Really hard to say. Try holding down the home button and power button together for 30 seconds while it is not plugged in and see if the apple icon appears. If it does see if it boots normally. If it does not then you may have one of any number of issues from a software glitch during your update or a hardware failure (which is why it is getting warm.).

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

I’ve tried multiple times but it comes on after 2 minuets and the screen remains black but you’ll know it’s on, then it goes off

의

댓글 달기

옵션

Try another cable and usb port first. Hopefully that’s the issue, because everytime I’ve gotten error 4013 is a corrupt image of iOS on the storage or corrupt storage in general which is a hardware issue.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Dolapo a 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 72