평판: 13
1
I just installed a new lightning connector and the install went very smoothly. Now I have no issues with charging the phone but now the touch sensor doesn’t work. It pops up when I turn the phone on and states “Touch Id is unavailable on this phone”. Anyone have this happen before?
좋은 질문 입니까?
평판: 219
7
2
2
There’s a good chance you accidentally ripped the home button flex by accident, which can lead to this issue. Other causes would be damaging the home button itself, or not having it seated correctly. I’d take a magnifying glass and look over the flex cable to see if you can spot any micro-tears. Good luck!
해당 답변은 도움이 되었습니까?
Is this the flex that is attached to the home button itself or one of the ribbons on the side of the screen?
Check all of them if you're unable to find any damage on the one attached to the home button. I am unfortunately not sure which one of the screen-to-device ribbons it runs through, but it has to be one of them. Sorry I can't be of more help!
You are right about ripping the flex, when I try to repair my iphone I did this mistake.
평판: 139
3
24 시간 전: 0
7일 전: 0
30일 전: 1
전체 시간: 51
