기기를 수리하세요 커뮤니티 상점

Announced October 22nd and released November 12th, 2013. The iPad mini 2, also known as the iPad mini with Retina Display, has all the pixels of the iPad Air in a smaller 7.9" form factor.

426 질문 전체 보기

옵션

Lcd stays black once locked after replacement

Got the LCD replaced today and everything works fine till the screen either times out or gets locked.

after locking when I try to unlock the iPad the screen stays black but if I plug it into the tv with a hdmi adapter the screen shows up on tv and digitiser does work.

If I restart the iPad it works again till it locks.

running 12.1.1

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 1개
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

What happens when you try holding the power button when it gets stuck on the black lit up screen? Does it show the slide to power off prompt?

Does the home button work at all on that digitizer? This points to a bad replacement digitizer where the smart cover sensor is faulty or missing on it.

Might need to cover the bottom digitizer border and home button cable with kapton tape so that the home button does not short with the digitizer or iPad housing.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 1개:

Holding power button down has it function as normal you just can’t see anything. Home button works fine. It’s all original parts except for LCD.

Have been searching all afternoon and can not find anyone else with this problem.

의

댓글 달기

귀하의 답변을 추가하세요

James Brannolte 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 104