주요 콘텐츠로 건너뛰기

15 인치 "Desk Lamp" iMac G4 700MHz M6498 PowerMac 4,2

32 질문 전체 보기

When powered on, fan spins loudly but no sounds

When I hit the power button on the computer nothing happens, other than the fan spinning up loudly. No other lights, and the monitor don't turn on. Can somebody please lend some insight? I just ordered a new pram battery as per some other answers I've read. I was thinking of replacing the logic board but want to know if anybody has anything else I can try out first. Also, can somebody please tell me how to disconnect the "TMDS video connector"? I don't want to break anything :s I've included a picture of the cable I'm talking about, in case I'm not referring to it correctly.

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

선택된 답변

The connector has a plastic U shaped cover over it. There's a sticky strip on one side. It will pop off if you wedge a small flathead under the edge. Unplug the machine and all peripherals and hold down the power on button for 10 seconds, then plug it back in and try to start. If this fails, wait for the PRAM battery.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Awesome, thank you very much for your help! Holding the power button didn't seem to work, however. I'll let you know if the new battery fixes it. Thanks alot!

댓글 달기

귀하의 답변을 추가하세요

Armando 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 251