주요 콘텐츠로 건너뛰기

모델 A1286. 2011년 2월 출시 / 2.0, 2.2, 또는 2.3 GHz 쿼드-코어 Intel Core i7 프로세서

586 질문 전체 보기

Not turning on after crash.

Essentially my MacBook Pro crashed while I was opening QuickTime not too long ago and ever since I have not been able to turn it back on.

The only signs of life are when the MagSafe connector is connected with shows green and then allows me to push the battery indicator button. If I press the button immediately after plugging in the adapter it will rapidly blink the first LED and then any presses afterwards will flash all eight LED’s.

Other than that nothing else appears to work. I’ve taken apart the entire computer and there aren’t any obvious signs of damage.

Thank you in advance to any suggestions; I’m willing to try just about anything!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

The flashing battery tester LED’s is telling me your battery is worn-out! You’ll need to install a new one. Here’s the needed part MacBook Pro 15" Unibody (Early 2011-Mid 2012) Battery and the IFIXIT guide to put it it MacBook Pro 15" Unibody Early 2011 배터리 교체

MacBook Pro 15" Unibody (Early 2011-Mid 2012) Battery 이미지

상품

MacBook Pro 15" Unibody (Early 2011-Mid 2012) Battery

$89.99

해당 답변은 도움이 되었습니까?

점수 0

댓글 6개:

Unfortunately, I don't think that's going to solve the problem. I was operating the computer on battery power when the crash happened, and it had roughly 100 cycles on it.

What is the MagSafe charger LED, Amber or Green?

Shouldn't I be able to start it or see at least some kind of life with just the power adapter? Also, it doesn't exactly explain the seemingly random crash... Although I do recall possibly having read something about the battery being necessary to charge up a capacitor on the logic board.

댓글 1개 더보기

댓글 달기

귀하의 답변을 추가하세요

Michael Stefanchik 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 55