1r5 disconnected. Have to push down to make work .

Question

JBL Flip 3

Repair and support for the third generation of the Flip portable speaker by JBL.

70 질문 전체 보기

austin johnson @austinjohn70159

평판: 1

게시일: 2018년 12월 18일

옵션

1r5 disconnected. Have to push down to make work .

I diagnosed that my 1R5 inductor is not detchted but loose. It seems I have to push back toward the wall to make the speaker work. But if I let go the speaker stops working. This was caused by a drop. I have a Jbl flip 3.

How do I keep the 1r5 to stay pressed down so my speaker works.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

martijn muntenaar @martijnmun76850 평판: 681 8 2 · Answer 1 · 2018-12-20T14:22:44-07:00

가장 유용한 답변

martijn muntenaar @martijnmun76850

평판: 681

8

2

게시일: 2018년 12월 20일

옵션

hey austin,

as a general recomendation i would suggest to look if you can see if the connector to the main board is still correctly soldered in place and to see if you can solder it back on or replace the 1r5 if that doesn’t fix it just stay safe and good luck

-M

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기

JBL Flip 3

1r5 disconnected. Have to push down to make work .

답변 1개

귀하의 답변을 추가하세요