Replaced digitizer, iPad goes to sleep, but won't wakeup.

Question

iPad Mini 2 Wi-Fi

Guides for the Wi-Fi version of the iPad Mini 2. Announced October 22nd and released November 12th, 2013. The iPad mini 2, also known as the iPad mini with Retina Display, has all the pixels of the iPad Air in a smaller 7.9" form factor.

220 질문 전체 보기

Chris @chryse

평판: 45

2

게시일: 2018년 12월 21일

옵션

Replaced digitizer, iPad goes to sleep, but won't wakeup.

I work at a computer repair shop and replaced a digitizer on an iPad Mini 2, everything checked out. When I turned it on, it showed the Apple logo and the screen after you factory reset (which I did). Then after about a minute or two the LCD goes dark. Pressing the power button and home button don’t do anything. However I can still see the backlight on behind the LCD. This is a weird situation because I’ve never had/seen this happen on the iPad Mini 2’s that we previously replaced the digitizer on.

Things I’ve done:

Disconnected everything

Tried another LCD

Sent out the iPad board to a third party company who repairs them. They told us that there was nothing wrong and that they had it on for 30 minutes. They also said we might have a bad batch of digitizers, but I’ve tried all the digitizers we have and still nothing.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 2개:

Sounds like it's semi-asleep. Did you put the magnets back in the right place during reassembly?

Steve 의 2018년 12월 21일

^Bump

I agree with Steve, check the magnets, or more likely, find new ones if your having this issue they most likely aren't even there.

Idaho iRepair 의 2018년 12월 21일

댓글 달기

답변 0개

Sounds like it's semi-asleep. Did you put the magnets back in the right place during reassembly? — Steve
^Bump

I agree with Steve, check the magnets, or more likely, find new ones if your having this issue they most likely aren't even there. — Idaho iRepair

iPad Mini 2 Wi-Fi

Replaced digitizer, iPad goes to sleep, but won't wakeup.

답변 0개

귀하의 답변을 추가하세요