주요 콘텐츠로 건너뛰기

4세대 iPhone의 CDMA 버전. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. 16 또는 32GB / Model A1349 / CDMA 호환성.

295 질문 전체 보기

replaced power button now black screen with vib every few seconds

My power button had not been working for a while. So I decided to replace it to see if that would fix it. After the button install my phone will not power on. When I plug it into the computer or charging cable the screen remains black and it vibrates every few seconds. When I turn vibrate off through the side buttons it beeps every few seconds. I cannot get it to power back on. I tried to do a factory restore through iTunes and it said there was an issue and was not successful.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Perhaps you disconnected more than you were supposed to. Make sure the screen is properly connected to the motherboard, and check whether the power button isn’t constantly being pressed in by something inside.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Meagan Schober 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 33