주요 콘텐츠로 건너뛰기

2011년 상반기 모델, A1278 / 2.3 GHz i5 또는 2.7 GHz i7 프로세서.

778 질문 전체 보기

magsafe 1 - repairing the cord

Hy everyone,

My issue is with the magsafe 1 from Mac. While clearing the cord suddenly broken and stopped completely to work.

The only correction at my point of view was changing the cord which a purchased over internet and upon arrival changed and for my bad surprise even changing with new one the charger is no longer working properly.

Connected to the power at the wall and plugged to the mac it lights up the brown or green light at the connector but shortly lights off and no charges to the battery is going on.

I even purchased another one, but not the original and it works, but the battery isn't charging 100%.

One or another clue would be helpful.

Thanks in advance.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

가장 유용한 답변

I’m repairing a couple myself this coming week as I finally found a guide to do it.

https://www.youtube.com/watch?v=iTkJh9LZ...

I got the cables here:

https://www.ebay.com/itm/Mag-safe-1-L-Sh...

also ordeedr for the Mag=Safe II here. then found out it ships out of China:

https://www.ebay.com/itm/AC-Power-Adapte...

Come back and ask later in the week to see if I was successful ;-)

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

@mayer - You are taking on a great risk here!

Between the fire risk if you are cracking open the case, if the power wires in the cord short with the signal wire you'll damage the power circuit in the laptop.

Do review this Teardown and exploration of Apple's Magsafe connector make sure you've used the correct cord for the given charger.

댓글 달기

I don’t try to fix the MagSafe chargers. The MagSafe connector has some logic in it which is unique to the given charger wattage. So the cord you got may not be the correct one. Teardown and exploration of Apple's Magsafe connector. Additionally, if you mis-wire the cable you can damage your system and often times a worn cable can short out also killing your system!

So where does that leave us??

I would just get the correct real MagSafe charger your system needs and make sure the DC-In board connection in your system is in good shape. Review this Apple T/N Apple Portables: Troubleshooting MagSafe adapters as well as MacBook Pro 13" Unibody Early 2011 MagSafe DC-In Board Replacement

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Marco Bella Rosa 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 90