평판: 59
5
1
Hi,
I already have 2 SSDs in my iMac (iMac Intel 27" EMC 2429, 2011), one is replacing the original HD (with the thermal probe) and the second one is behind the optical drive. Can I remove the optical drive and install a 3rd SSD? Do I need any special parts if this is possible (like the thermal probe) ?
Thank you!
Tom
좋은 질문 입니까?
평판: 478.9k
35
329
970
While its theoretically possible I don’t think you’ll gain that much as the Optical drive port is only SATA II (3.0 Gb/s). I would put in a large 2.5” SATA II HDD instead or just leave the optical drive.
Basically, you’ll use the iMac & Mac mini Dual Drive Enclosure following the optical drive swap out iMac Intel 27" EMC 2429 Optical Drive Replacement. Don’t forget you’ll need a drive that runs at SATA II (3.0 Gb/s)
How about just getting a bigger SSD, swapping out your oldest drive with it. Bigger SSD’s are faster!
해당 답변은 도움이 되었습니까?
Thank you Dan for your very fast reply!
I thought the optical bus was also SATA III, but if it’s SATA II, it makes no sense to connect an SSD.
All the best,
Tom
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 45
