주요 콘텐츠로 건너뛰기

A 64.52" LED 2160p 4K UHD Television released in 2015.

13 질문 전체 보기

must power cycle to get pix

VIZIO P702ui-B3 If off for more than a few hours the led (lower left corner) lights, Audio works, but no picture. If power cycled 2 or 3 time it turns on normally.

This happens with the remote or the manual switch on the set.

I’m thinking about replacing the power supply. Could that fix it or perhaps the Tcon board?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

I had a similar problem with my P55-C1 (audio, no picture). I used a flashlight and discovered that the picture was actually working but the backlights weren’t coming on. I replaced the LED driver boards (four of them) and now I have a working picture again.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

where do you find a driver board? Would you post a tutorial on replacing it please?

댓글 달기

귀하의 답변을 추가하세요

Greg “Bad Kitty” Arikian 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 318