기기를 수리하세요 커뮤니티 상점

모델 A1502 / 4MB 공유 L3 캐시 2.6 GHz (Turbo Boost 최대 3.1 GHz) 또는 2.8 GHz (Turbo Boost 최대 3.3 GHz) 듀얼-코어 Intel Core i7 프로세서.

494 질문 전체 보기

옵션

No backlight, image is there, looking for backlight fuse and driver

Today my MacBook Pro 13" Retina (Mid 2014) with a 3.0 GHz logic board

Started flickering. I restarted it, and when it turned back on there was no backlight. I can see an image when I shine a light through the screen from the backside Apple logo.

1.5 years ago it was repaired also due to no backlight, and during that repair some “IC components” was replaced on the logic board. It seems to me that it is the same problem I’m having today.

I have the following questions:

  1. Is there any way to fix this without buying a new logic board, and if so can i do it my self?
  2. Where is the fuse/driver located on the logic board?
  3. Is there any guide as to test which part of the logic board that is not working

Thanks in advance!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

You’re the best gage of your skill sets.

  • Do you have the tools to work on your system?
  • Are you able to read and understand schematics and board layout drawings?
  • Do you have the needed tools to micro-solder the tiny components used on your logic board?
  • Do you have access to the needed parts?

Many people don’t have these skills or have issues handling the small components. Don’t take it hard, even I’ve given up doing it as my arthritis prevents going this deep anymore.

We don’t really get into the deep end of circuit repairs like you need here. Often times liquid damage is the cause of many failures like yours. I would start off making sure thats not the issue. Take the time to inspect your logic board and if you see something thats damaged, corrosion or staining take a good picture and post it here for us to see. Then we can guide you then 기존 질문에 이미지 추가하기

You may want to review some of the YouTube vids from:

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 2개:

Thank you for the quick response! As a matter of fact the screen turned itself on after a while. It flickered a little, but is now stable. So it seems the fuse isnt blown (yet)...

Should it happen again:

I have the disassembly tools myself, and voltmeter, oscillometer and solder station i think i can lend.

I'm not sure about where to get IC spare parts though..

의

I would still make the effort to pop the bottom cover off using a soft paint brush carefully wipe the dust build up and use a can of can'ed air to blow it away. See if you see something amiss. Its better to catch this now before you loose the backlight altogether. You may have some corrosion damage that needs attention.

의

댓글 달기

귀하의 답변을 추가하세요

enkanah 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 75