주요 콘텐츠로 건너뛰기

2011년 10월 24일 출시 / 2.2, 2.4, 또는 2.5 GHz 쿼드-코어 Intel Core i7 프로세서

405 질문 전체 보기

Unit will not fully boot.

I’ve tested multiple hardrives with known working partitions.

i’ve swapped out the hardrive cable with a new functional cable.

tested the hardrive on separate macs, and they work fine.

I’ve performed a Pram reset and reset the SMC to no avail.

It passed multiple extended hardware tests.

It has no peripherals connected and isolated further by removing the non essential components, Airport/diskbay.

And i legitamitly have ran out of ideas.

any thoughts are welcome…

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 2개:

does it work with a USB to SATA adapter?

It will not boot to externals or recovery mode.

댓글 달기

답변 1개

Is it shutting off at 75% loading bar? Usually it's bad GPU in the 2011 15” unibodys.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

It’s making it to 100 percent but then it just hits a blank white/gray screen and shuts off and try’s again.

댓글 달기

귀하의 답변을 추가하세요

Jared Owens 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 33