주요 콘텐츠로 건너뛰기

The JBL Charge 3 can be recognized by its distinct woven speaker cover and rubber accents. It was released in 2016 and features a fully waterproof design, 20 hours of playback time, and bluetooth connectivity.

58 질문 전체 보기

aux input distorted when cable plugged in correctly

hi!

when i use the aux input and plug in the cable correctly, there is a heavy “robotic” sound,

when i slightly pull the plug it seems getting the correct signal, but i’m worried its mono.

anyone recognizes this?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

PC 노트북 배터리

큰 전력 향상을 위한 손쉬운 수리.

지금 장보기

PC 노트북 배터리

큰 전력 향상을 위한 손쉬운 수리.

지금 장보기

1개의 답변

선택된 해법

Hi,

Adjust the balance on the audio source (or connect the speaker to an audio source that has this ability) so that you can tell if it is in mono or stereo, when you slightly withdraw the plug from the aux socket. Try full L and then full R to listen if each speaker still works.

It may be that there is a faulty aux jack in the speaker. Unfortunately they cannot be repaired but have to be replaced

Here’s a link to the ifixit JBL Charge 3 Motherboard Replacement guide, which may be of some help gaining access to the aux port.

I cannot find a service manual or a parts list for the speaker so you may have to search on places such as this to try and get a compatible replacement part. Look for 3.5mm phone connectors and then check the datasheets for the component to see if it matches.

Hopefully this is of some help.

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요

귀하의 답변을 추가하십시오

Martijn Comes 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 2

지난 7일: 15

지난 30일: 46

전체 시간: 208