주요 콘텐츠로 건너뛰기

The Polaroid OneStep 2 was released in 2017 and is an instant camera that provides the photos you take to your hands in just a few moments.

10 질문 전체 보기

film won't eject after taking a picture

My camera is fully charged but won’t eject film once I try to take a picture. Now when I turn it on, not all 8 lights are on even though they all should be since it’s fully loaded with a new pack. Instead, from left to right only the 1st, 3rd, 6th, and 8th light is lit. What is going on?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1

댓글 2개:

paper is in in the correct direction?

I have this problem too, and the only solution I’ve found really is to get the camera repaired. However, can’t find anything on Polaroid’s website or anywhere else about what to do or how I can get my camera repaired. Customer support isn’t helpful. This is the only post I’ve found; I thought I was alone!

댓글 달기

답변 1개

Push the film in fully

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Jian Zabalerio 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 8

전체 시간: 1,075