주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2690 질문 전체 보기

How to reset iPhone 6s when home button isn't working.

Please help me out,

So my iphone jus went black screen, I plugged it to a charger shows nothing, plugged it to my pc, doesnt show if it connected. Unresponsive to my itunes.

I looked for a fix and it said to soft reset the iphone ie holding the power button and the home button at the same time for 10-20secs but my home button hasnt been working for about 2-3 months now. So how Do I fix my phone. And im sure its not my lcd as the iphone doesnt connect to my laptop doesnt show if it is connected.

So basically my iphone 6s is switched off atm. Doesnt show anything if i press the home button.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 2개:

Hey! I would recommend trying to install a new battery on the phone to see if that can fix anything. It could also be a lightning port issue which is fixable as well and not as hard as it seems! Also nice Rengar profile picture by the way!

Buy a home button. If it works its worth it.

댓글 달기

답변 1개

Hello Drake

If the phone is not recognized by the PC, it is most likely that it does not turn on. Leave it connected to the computer for 1 hour to make sure it has a charge but still does not recognize it.

If after loading and connecting it does not give a signal of life, the first thing would be to try another battery.

If you do not want to try another battery, you can open the terminal to disconnect yours for a few seconds / minutes and reconnect it. This is similar to a restart.

This seems like a problem with the battery if the terminal has not been wet or dropped before.

Good luck!

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Drake 17x 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 377