평판: 635
6
6
1
i have a nintendo switch at my store that isnt charging. i think its a bad resistor because im reading OL and no power is getting past. can someone tell me the proper value for the resistor right next to the number 6 in pic?
좋은 질문 입니까?
평판: 34.4k
10
22
44
Have you changed the charging port as that would be more like the problem
해당 답변은 도움이 되었습니까?
problem isnt the charge port. i looked at the inside of the port under a microscope and it looks brand new no bent pins. also i touched up the solder joints on the port to make sure there was no cracks. 5volts is getting to the resistor but 0 on the other side. and it should drop it down to 3.2volt. like i said the resistor is OL and no power is passing. so i know the problem is that component, i just cant find any service literature to find the proper resistance.
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 70
