주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2690 질문 전체 보기

Post-screen replacement, iPhone 6s will not charge beyond 1%

I recently replaced the screen of an iPhone 6s that hasn’t been charged since last June. It turns on when I plug it in, and the screen works fine, but my battery never charges above 1%—and my phone quickly dies when I unplug it. Do you have any idea what might be wrong or how I can fix it? Thanks!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

Thanks for the answers! I played around with detaching and reattaching the battery a couple times. At first, I only got a black screen depicting a red, depleted battery. But on the second attempt, the phone turned on at 4% and then fully charged to 100%. I’ll keep an eye on it, but a new battery might be in my future.

댓글 달기

답변 2개

선택된 답변

I’ve had phones from friends/family with this issue, and a battery replacement fixes this type of issue.

해당 답변은 도움이 되었습니까?

점수 3

댓글 1개:

Yup, 6 months fully drained is more than enough to kill a battery.

댓글 달기

Such fault have so many issues like battery,battery connector or SWI line failure.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

[deleted] 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 42