해결됨: I accidentally replaced the display repair with power on - iPhone 6s

I accidentally replaced the display repair with power on

Hi This time, I watched the repair video on Youtube and made my first self repair. However, after the replacement, no screen appears on the display I put this phenomenon on ifixit last time, and I received the kind answer that it carried out the repair with power on. I have posted a question for the same reason for this time. If I repair it while the power is on and it does not display on the screen, what parts should I replace? This article is written by using Google Translator because I am not good at English. I would appreciate your understanding if you have mistakes such as spelling or speech words in my article

게시일: 2019년 3월 30일

옵션

The backlight filter most likely needs to be replaced, what happens usually when the display is plugged in with battery still connected you’ll see a puff of smoke near the screen connector which indicates backlight filter blew.

Try using flashlight on the screen and see if you can make out dim display from the flashlight.

It will require someone with micro-soldering experience to replace that filter.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 2개:

I have not had a repair of the backlight filter, should I buy a motherboard module, logic board module, or cable from ifixit

김태현 의 2019년 3월 30일

also check that all the cables are attached properly. Excessive bending of cables can damage them too. you may also try rebooting the phone (power off and then on).

pollytintop 의 2019년 3월 30일

댓글 달기

iPhone 6s

I accidentally replaced the display repair with power on

답변 1개

귀하의 답변을 추가하세요