주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2690 질문 전체 보기

I just got done replacing my old battery but my device won't turn on.

My phone needed a battery replacement, so I ordered a battery from IFIXIT. I put the new battery, following the steps in the forum, but my phone won’t turn on. What should I do ?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 3개

선택된 답변

The first step I would take since you don’t have another new battery to use is to see if you can get the phone to power on with the old battery connected. This should tell you if the new battery you got is a bad battery. If I had to take a guess, I would say you just got a faulty battery and you just need a replacement. You said you didn’t remove the screen so it’s likely not a problem with your screen. While connecting the screen to the phone with the battery plugged in is never a good idea, it doesn’t necessarily mean you will blow the LCD backlight.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기
가장 유용한 답변

First try to hold the home button and power button at the same time for about 10-15 Seconds. You should see the Apple logo appear. If this doesn’t work check to make sure everything is attached and/or put back exactly where you found it. If none of these work you may have to contact ifixit’s customer service or something of that sort. Maybe get a new battery.

해당 답변은 도움이 되었습니까?

점수 2

댓글 2개:

How do i get a hold of IFIXIT customer service ?

댓글 달기

When you remove the screen and you don’t the battery connector you will fry your LCD. Could that be what you did?

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

No, I disconnected the battery first

댓글 달기

귀하의 답변을 추가하세요

Pepe Sanchez 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 72