주요 콘텐츠로 건너뛰기

Smaller version of the original iPad Pro. Released March 31, 2016. Features a 9.7" display, A9X processor, and 32/128/256 GB storage options. Available in Silver, Space Grey, Gold, and Rose Gold.

147 질문 전체 보기

Display Connector Damaged? Any Way to Fix?

Hello! I have an iPad Pro 9.7” and, after getting my replacement screen back off, discovered that there’s a bit on super glue on one of the Display Connectors and I was wondering if there’s any way to fix this. Thanks!

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Can’t really see much from the picture but sure it can be fixed. If the superglue prevents the connector to be put correctly in place you can gently scrape it away with some fine tweezers and patience, it’s a tough glue but it’s stiff and it breaks into small crystals when correct pressure is applied. If there’s too much to be removed in a reasonable amount of time the connector can be replaced, but it’s a pretty challenging microsoldering repair and a pro is needed to fix it.

해당 답변은 도움이 되었습니까?

점수 2

댓글 2개:

I just applied a tiny amount of Acetone to the superglue. (making sure that it didn't touch the connectors) Hopefully that will soften the Glue, in turn making it easier to scrape away.

@jimmcl1951 Be careful with acetone as it may damage plastics without really softening the superglue, which is a bad beast. In my experience nothing really helps softening it..maybe it would help some cold to make it a bit more brittle.

댓글 달기

귀하의 답변을 추가하세요

James McLellan 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 49