Skip to main content

Microsoft's third-generation Xbox game console, released November 22, 2013.

482 질문 전체 보기

XBox One Schematics diagrams

I need help identifying 2 resistor values near the HDMI ports. Any help would be greatly appreciated. Thanks in advance for your help.

Update (04/08/2019)

Here are some pictures

Block Image

Block Image

Answered! View the answer I have this problem too

Is this a good question?

점수 0

댓글:

Not sure those uploaded or not

의 답변

I attempted to post some pictures for you. I don't think it worked. Anyways, I hope my description was helpful.

의 답변

Don't see them. can you upload them to imgurl or tiny upload and post link? I got the board in front of me there is quite a few resistors there

의 답변

I will see if I can post a new question with pictures.

It just says Image. I don't think it's going to let me.

의 답변

I posted a new question tilted "need help identifying 2 resistor values" you my need to scroll down to see the pictures.

의 답변

2에 댓글 더 나타내기

코멘트 추가

안드로이드 수리 키트

새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

지금 장보기

안드로이드 수리 키트

새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

지금 장보기

2개의 답변

선택된 솔루션


I just took measurements from a board I'm working on, the resistors read 2K (2,000) ohms on my meter. Hope this helps, size might be 01005.

Was this answer helpful?

점수 0

댓글:

Thank you very much for your help and time.

의 답변

You are welcome.

의 답변

코멘트 추가

Can I ask you why you are looking for these two resistor values? What’s the issue with your Xbox?

can you provide a picture of which ones exactly I could probably get you the values since my Xbox one is torn open currently.. as I’m trying to fix a turning on issue.

Was this answer helpful?

점수 0

댓글:

When trying to get the HDMI jack out, I heated the board up to do so. Whish I had a pre-heater and a nice hot air soldering machine. Hence why I should of waited till I got back to work where I have these tools available. I'm out from surgery though. Anyways, to make a long story short these 2 resistors fell off the board. The resistors are labeled R1M2 (bottom of board near HDMI out jack) and the other is R8A4 ( I believe this one was green in color on top side of PCB near HDMI in, close to the pins of the port) I was swapping out the HDMI in for the out. Real pain in the butt without the proper tools. I really appreciate your help so much. Thank you

의 답변

코멘트 추가

Add your answer

chris wilcox will be eternally grateful.
View Statistics:

Past 24 Hours: 8

Past 7 Days: 68

Past 30 Days: 281

All Time: 1,433