Skip to main content

2014년 9월 19일에 출시된 이 5.5” 스크린 iPhone은 iPhone 6의 큰 버전입니다.

1414 질문 전체 보기

Unable to activate touch id after screen replacement

Hi everyone,

After replacing my iPhone’s 6 Plus screen, i get an error “unable to activate touch id” Is it because im using my else’s screen?

So instead of buying a new screen, i used some else as a screen replacement and just replaced the home button with mine.

I have tried Hard Reset and i still get an error. The home button still works fine.

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

아이폰 배터리 수리 키트

Only $29.99

Buy Now

아이폰 배터리 수리 키트

Only $29.99

Buy Now

2개의 답변

선택된 해법

Try these if you haven’t already:

  • Make sure your using the original home button to the phone that Touch ID worked on
  • Try unplugging the battery, holding down the power button for 3 seconds with no charger plugged in then plug the battery back in and turn on
  • Make sure if you have the model that does when you swapped the screen if the metal heat shield with the flex where the home button plugs in is on the new screen.

*

  • These are just some tips I’ve used myself before and at least 1 of these has worked every time for me :)

해당 답변은 도움이 되었습니까?

점수 1

댓글:

Its working now. I swapped the metal heat shield with the flex and is all good now.

의 답변

의견 추가하세요

Ive had this before, your going to need to get an apple certified screen 3rd party isnt always great, that, or you didnt install the connections right

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

mos jab 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 4

전체 시간: 42