주요 콘텐츠로 건너뛰기

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

iPhone 6 won't turn on after battery replacement. Help!

I got a new battery replaced on my iphone 6

Then I got back home and put the phone to charge then it charged up to 76% then I removed the charger. Then I used it till it died (till it came to 0%)

It was night then I plugged my phone to the charger and slept I heard the sound of the charging which comes from the phone once you plug it

Then I left the phone to charge and then got up in the morning and my phone was dead

I tried putting it back on charge it didn't work. The Apple logo doesn't even appear.

Was it the battery that caused this error?

Please answer quickly

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 2개

Obviously batteries and then tristar etc usual issues such as this however have u checked that it hasnt just crashed??? Restart holding home and power button for a few seconds.

I tried that many times didn't work

If there's no battery connected will it show the Apple logo if I plug it to charge?

댓글 달기

답변 1개

선택된 답변

When charging circuit is damaged it might not charge the battery when it gets drained, that would be a logic board issue caused by aftermarket cables and chargers and would require microsoldering skills and tools. Try your old battery if you still have it or try another one for confirmation.

해당 답변은 도움이 되었습니까?

점수 3

댓글 1개:

If there isn't an apple logo with battery unplugged and charger plugged in it's pretty much gauranteed charging chip gone bad, as said needs micro-soldering work to replace chip.

댓글 달기

귀하의 답변을 추가하세요

Akila Weerasuriya 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 3

전체 시간: 191