Skip to main content

Released June 2017, the iPad Pro 10.5" replaces the 2016 iPad Pro 9.7".

38 질문 전체 보기

Glass/display perfect, but touch is wonky, what part do I buy?

Not sure what caused it but my iPad Pro has some areas (left side of screen) where touch is 100% unresponsive. In all other areas there are no issues at all. The front glass is in perfect condition, the display is also perfect, no dead pixels or anything going wrong. Would the digitizer be the part I should buy and replace ? All the standard, shut off, restart, etc methods already have been attempted.

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

아이폰 배터리 수리 키트

Only $29.99

Buy Now

아이폰 배터리 수리 키트

Only $29.99

Buy Now

2개의 답변

가장 유용한 답변

Touchscreen panel is acting up and causing ‘dead spots’ on random areas of display.

Digitizer and LCD screen are fused on iPad Pro 10.5” - separation/bonding requires special tools which I don’t believe is a cost effective method for consumers to go for.

If you are going to perform this repair yourself, I recommend buying digitizer/LCD assembly instead - you’ll save a lot of time and $.

Do take time to read this detailed guidelines written by @refectio for DIY repairs (scroll down to answer):

After doing my repairs (battery and screen) I have problems

This is iFixit guide on screen replacement:

iPad Pro 10.5" Screen Replacement

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

Review this and see if you can solve it with what they talk about: https://www.macworld.co.uk/how-to/iphone...

Otherwise try taking the display off and cleaning the glass on the inside. If that does nothing then yes the digitizer is the part that does that, so that would need to be replaced.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Cv Neko 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 6

지난 30일: 10

전체 시간: 42