주요 콘텐츠로 건너뛰기

Repair and disassembly guides for Kenmore Microwaves.

157 질문 전체 보기

Microwave shuts off intermittently, already replaced door switch assem

I have a model 401.80082700 serial 725MM00044. Intermittent problem. Microwave goes through heating cycle and then totally powers off…no display, no light, no power. After 15-30 seconds the display comes on and instructs to press clock and reset time of day. After doing so the microwave is fully functional and may operate several times before powering off again. Occasionally the display appears fainter than normal, esp the center of display. I have replaced the door switch assembly but after several days the intermittent problem has returned. What do you think? TY

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1

댓글:

After much delay and frustration I ordered and replaced the control board…..works great…..thanks for your recommendation!

의 답변

의견 추가하세요

Apple Watch Kits

Screen and battery repairs just got easier.

지금 장보기

Apple Watch Kits

Screen and battery repairs just got easier.

지금 장보기

2개의 답변

선택된 해법

Sounds like the problem is the control board, not the door assembly. Try replacing the main controller circuit.

Good luck!

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요
가장 유용한 답변

There are two parts to that door switch, here they are on your model along with how to test them:

https://www.repairclinic.com/RepairHelp/...

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요

귀하의 답변을 추가하십시오

Ken Thome 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 1

지난 7일: 1

지난 30일: 2

전체 시간: 40