주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

iPhone 5s apple logo and shutdown, restore worked for 3 weeks

Hi.

I have an iPhone 5S that shows the apple logo for half a second (when i try to turn it on), and shuts down. Then, if i try it again, nothing happens and the iPhone seems to be completelly dead. If i try it again after half an hour or so, it does the same thing, apple logo for 0.5 seconds and shut down, and then dead again for another +/-30 minutes.

I was able to restore it on iTunes. By pressing the power+home button for a while the screen remained black, but the phone was recognised in itunes as being in recovery mode, and i was able to restore it. The iPhone worked fine for about 3 weeks, but now it’s having the exact same issue, so i believe this is an hardware issue. Any suggestion? I tried with a new battery and the result is the same. I have some experience with micro-soldering, but not so much with diagnosing… Thanks in advance!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

That is Nand issues.

해당 답변은 도움이 되었습니까?

점수 1

댓글 3개:

But if i want to replace it, i need to program it first, right? Its not just desolder the old one and solder a new one i think :S

Yes,you need hardware skills to do .

Any problems with the battery in the phone? It's rare but a bad battery can cause a problem like this.

Half a second on apple logo does indicate corrupt firmware so it could also be nand like said above.

댓글 달기

귀하의 답변을 추가하세요

Poligros 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 56