평판: 13
3
1
Hello, so when I plug my lcd tv it just turns on the red led, flashes the backlight for half a second and then reboots. If I don’t unplug it it keeps going and going. Is there a way I can fix it?
좋은 질문 입니까?
평판: 782.2k
1.1k
893
2.3k
@tomst what I get out of this is that your TV never completes the booting up and goes into a boot loop. That sounds like an issue with the main board or the firmware. https://philips-tvconsumercare.kxondeman... Start by removing every input from your set and unplug it. Then hold the power button down for a minute or two. Plug the set back in and connect one input source. See if that made a difference. If not remove the back of your TV and check the boards and the interconnect cables. Post some images of what you see with your question. 기존 질문에 이미지 추가하기
해당 답변은 도움이 되었습니까?
@oldturkey03 i tried what you said and it is still the same. I uploaded a picture of the inside. There is nothing wrong I can see about it but maybe you see something I don’t.
@tomst can you check the Philips website to see if there is a firmware update for your TV? They do have the instruction on how to update. Just to make sure that this is not a firmware situation.
@oldturkey03 i don’t think I can update the firmware since it is an old model, it doesn’t even have usb. It always worked fine until like 5 years ago.
Okay let me look at the schematic and see which way we are going to approach this. Do you have a multimeter?
Thank you so much for your help. Yes I have a multimeter.
https://forum.xda-developers.com/showpos...
try this link. It worked for me. If your TV model is the same it would be beneficial for you too.
해당 답변은 도움이 되었습니까?
I found a way of solving this . It’s the android softwhare watch this link https://www.youtube.com/watch?v=A3eYYcrs...
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 8
30일 전: 37
전체 시간: 8,451
댓글 2개
@tomst what is the complete model number for your tv?
oldturkey03 의
@oldturkey03 it’s 26PF5321/77
Tom 의