주요 콘텐츠로 건너뛰기

2016년 9월 16일 출시. Model 1660, 1778. GSM 또는 CDMA / 32, 128 또는 256 GB / 로즈 골드, 금색, 은색, 검정색, 칠흑색으로 제공됩니다.

1406 질문 전체 보기

iPhone 7 Stuck On Apple LOGO

Hi Guys.. Hi @refectio SIR

I have an iphone 7 (NOT water Damage). When i connect it to DCPS, show 0,22 0,23 amp, and stuck on these values. 

There is only apple logo on the screen.

Dont restart, just stuck on apple logo.

Check Audio IC, but no improve.

The phone doesn't HOT, there is no short on the board.

I found only long screw damage near the battery, unfortuanlly i did'nt find nothing on ZXW about LSD on phone 7.

If i try to reset have error 9.

Block Image

Is there any suggestion  plz?

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 3개

가장 유용한 답변

Try replacing tristar as it can cause stuck on apple logo. I’ve had one point where it would have no display but show 0.17A on the DCPS, then pointed to a shorted tristar (it heated up a pad under the PMIC):

https://www.youtube.com/watch?v=mcUgeDTt... at start if video pretty much same short I had.

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요

My answer is replacing the battery. If you watch Hugh Jeffreys, you will know that he had the same problem with one of the iPhone 7 he was refurbishing. Your problem here is that your battery is dead and unable to charge. [Link removed]

After receiving the battery, find the right guide on ifixit.com and your iPhone will work!

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

Thanks Everyone Guys.. its a Nand problem. I reball the Nand and phone turn on and work perfectly.. Thanks

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

AGS 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 27

전체 시간: 139