기기를 수리하세요 커뮤니티 상점

Released in June 2017 as a successor to the Surface Pro 4. Also known as Microsoft Surface Pro 12.3". Model number: FJT-00001.

51 질문 전체 보기

옵션

Screen flicker after microsoft logo then goes black.

was doing a battery replacement and after i got the screen off i wanted to check everything was ok so i booted it up and it would post the microsoft logo, then flicker some little white squares above the logo in a line. then goes black. Hooked up to a monitor with the mini display port and its running fine on there. does this mean the screen is broken, even tho it still shows the logo for a sec?

Update (06/05/2019)

also the touch screen even works when its a black screen, i can see my fingers interacting with stuff on the monitor hooked up through mini display port

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

If the screen still exhibits some functionality, then perhaps it wasn’t re-attached properly? Try carefully re-attaching it one more time to see if there’s a difference.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 4개:

yes I have several times. no luck.

의

what do you think the odds are that its something in the display compared to the main board? I am thinking about ordering a new display but I dont wanna waste my money.

의

If you hooked up a monitor to the mini Display port and it worked fine from there, then most likely the problem is the display on the Surface Pro and not the motherboard.

의

ok, thanks for your help Dan.

의

댓글 달기

귀하의 답변을 추가하세요

Blake 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 470