No chime, black screen, white light steady

Question

iMac Intel 24" EMC 2111

모델 A1200 with 2.16 또는 2.33 GHz Core 2 Duo 프로세서

113 질문 전체 보기

s m @l6bmwbeezgg51td

평판: 21

2

1

게시일: 2011년 7월 9일

옵션

No chime, black screen, white light steady

Hi guys,

If iMac is off, but power is plugged in, number 1 diagnostic LED is on.

If iMac is on, no chime, fans go max, black screen, white light stays steady and number 1 and 2 diagnostic LEDs are on.

If LCD unplugged and external monitor plugged in, can't turn off, it turns right back on, once external unplugged, it turns off.

Also tried with detaching everything (add on cards, hard drive, etc.), no results.

Maybe the power supply? Hope its not the logic board....

Any ideas?

Thanks!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 달기

답변 3개

선택된 답변

mayer @mayer

평판: 685.2k

MacHale Enterprises

3.4k

1.1k

2.6k

게시일: 2011년 7월 9일

옵션

LED Startup Sequence

LED #1 = Power available.

If no LED is visible:

• Verify AC source

• Verify known-good AC cable is connected

• Verify cable connection between AC inlet and power supply

• Verify cable connection between power supply and logic board

• Verify power supply

LED #1 + LED #2 = Power available, and system is powered on.

If second LED is not visible when power button is pressed:

• Verify power button connection to logic board

• Verify power button functionality

• Verify cable connection between power supply and logic board

• Verify power supply

• Verify logic board

LED #1 + LED #2 + LED #3 = Power available, system is powered on, and video card found.

If third LED is not visible after power on:

• Verify that MXM video card is seated properly

• Verify logic board

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 5개:

Thank you for the prompt response.

• Verify logic board

What kind of tool is required for that?

Thanks.

s m 의 2011년 7월 9일

Exchanging the logic board with a known good one. Remember these instructions are for an Apple tech sitting there with all the resources in the world at his fingertips.

mayer 의 2011년 7월 9일

Thank you, so if third LED is not on, most likely logic board.

s m 의 2011년 7월 9일

Logic board or video card. I don't remember if this video card can be changed or not. I would check with these folks on a board repair: http://www.dttservice.com/imacintel.html

mayer 의 2011년 7월 9일

+ Good Kung Fu

ABCellars 의 2011년 8월 30일

댓글 달기

Thank you for the prompt response.

• Verify logic board

What kind of tool is required for that?

Thanks. — s m
Exchanging the logic board with a known good one. Remember these instructions are for an Apple tech sitting there with all the resources in the world at his fingertips. — mayer
Thank you, so if third LED is not on, most likely logic board. — s m
Logic board or video card. I don't remember if this video card can be changed or not. I would check with these folks on a board repair: http://www.dttservice.com/imacintel.html — mayer